Sauna tents bring the experience of deep, restorative heat to almost anywhere—whether you're nestled in the woods, relaxing in your backyard, or parked on a lakeside camping trip. But to get the most out of each session, the setup area itself matters more than most people think.
Choosing the right location and preparing the ground and surroundings can make the difference between a frustrating, damp setup and a smooth, rejuvenating experience.
Here’s how to properly prep your setup area before pitching your sauna tent outdoors.
Why the Setup Area Matters
A sauna tent isn’t just about the tent and stove—it’s about the environment around it. Where and how you place your tent impacts:
-
Heat retention and airflow
-
Safety, especially with wood-burning stoves
-
Comfort before, during, and after your session
-
The overall vibe and ease of use
By taking a few minutes to prepare the area properly, you’re setting the tone for a much more enjoyable (and safer) sauna ritual.
1. Choose a Flat, Stable Surface
Start by identifying a patch of level ground. This gives your tent a stable base and helps your stove operate safely.
Best surfaces include:
-
Packed dirt or gravel
-
Short grass or natural clearings
-
Wooden decks (with proper heat protection)
Avoid:
-
Uneven or sloped areas
-
Loose sand (unless paired with mats or flooring)
-
Rocky or unstable ground that can shift under heat
Tip: Test for level by placing your bench or stove base and watching for wobble.
2. Clear Debris and Hazards
Once you’ve picked a spot, remove any sticks, rocks, pinecones, or uneven debris. This helps:
-
Prevent damage to the floor of your tent
-
Avoid tripping hazards when moving around inside
-
Create a clean base for insulation or flooring
If the ground is damp or muddy, consider laying down a tarp or waterproof layer first.
3. Consider Airflow and Wind Direction
Your tent’s ventilation system needs natural airflow to work effectively. Place your tent so vents are oriented to catch gentle breezes, not face strong gusts head-on.
Avoid fully enclosed, windless areas (like dense woods with no air movement) and fully open hilltops (where wind can rip through).
Position your low vents on the windward side and upper vents on the leeward side to create passive airflow.
4. Mind Overhead and Nearby Obstructions
While trees can provide shade and wind protection, low-hanging branches or brush can become fire hazards, especially when using a stove with a chimney pipe.
Ensure:
-
At least 6–10 feet of overhead clearance above your stove pipe
-
No dry brush or leaves near the stove exhaust
-
Clear space around the tent perimeter for easy access and ventilation
If you’re using Overland Sauna’s wood-burning stove, which can reach 200°F in 20–30 minutes, you’ll want a buffer zone to ensure safe heat dispersion.
5. Lay a Heat-Resistant Base or Flooring
Though the Overland Sauna tent is currently testing floor retrofit options, many users opt to create a DIY base to retain heat and protect their feet from cold ground.
Some flooring options include:
-
Reflective heat mats
-
Insulated foam pads
-
Wooden slats or pallets (away from direct stove contact)
This helps with:
-
Reducing heat loss to the ground
-
Creating a clean, comfortable surface to sit or lie on
-
Preventing mud or moisture from entering the tent
6. Stake Down for Stability
Even though the Overland Sauna Tent can be set up and broken down in minutes, it’s also designed to stay up for extended periods. Just make sure it’s properly staked and tensioned to withstand changing conditions.
For long-term setups:
-
Use heavy-duty tent stakes, not lightweight camping pegs
-
Secure all corners and guy lines firmly
-
Consider adding weight (like sandbags or rocks) in high-wind areas
Also, keep an eye out for animals—especially curious dogs—who might try to nudge their way in!
7. Prep Your Post-Sauna Zone
Once the tent is set, take a moment to prep the area right outside the entrance. Think of it like your cooldown zone.
Ideas include:
-
A towel or mat to stand on when exiting
-
A bench or chair to sit and dry off
-
A water bucket or cold plunge tub
-
A small tarp-covered area for changing clothes
If sauna use becomes part of your regular routine, these small comfort zones go a long way.
8. Think About Water Access
You don’t need plumbing, but having access to clean water nearby makes sauna use more refreshing.
Use water for:
-
Hydration during and after your session
-
Splashing onto rocks to create steam (with caution)
-
Cooling down post-sauna
If you're off-grid, a jug or gravity-fed system works well. In winter, pre-fill containers to avoid frozen taps.
9. Test the Fit With Your Bench Setup
Before lighting your stove, make sure your seating fits securely inside the tent. Overland Sauna tents can support a 24” x 60” bench or even a two-tier system, offering a variety of heat zones.
Test spacing between the bench and stove for:
-
Safety clearance
-
Legroom
-
Ease of movement inside the tent
10. Do a Quick Safety Walkthrough
Before every session, run through a quick checklist:
-
Is the stove venting properly?
-
Are flammable materials cleared away?
-
Are the tent corners secure?
-
Is your water, towel, and exit area ready?
A 2-minute check ensures peace of mind.
Overland Sauna Tents Are Built for Flexible Setups
One of the reasons Overland Sauna tents are loved by outdoor wellness seekers is their adaptability. Whether you’re camping for a weekend or creating a year-round backyard ritual, their three-layer cotton construction, stove compatibility, and thoughtful ventilation features make setup easier.
And because they heat quickly and pack down fast, you don’t need to choose between mobility and performance.
Preparation Isn’t Complicated—But It’s Crucial
You don’t need a pristine spa environment to enjoy a great sauna. Just a little intention before you pitch your tent can improve heat performance, safety, and comfort dramatically.
A few extra minutes on the front end can turn a decent setup into a full-on micro-retreat.
FAQs
Can I set up a sauna tent directly on snow?
Yes—but lay down a heat-resistant mat or tarp first. Otherwise, the snow will melt unevenly, creating unstable footing and draining heat.
What’s the best way to secure the tent in high winds?
Use heavy-duty stakes and add sandbags or large rocks at the base. Stake guy lines at opposing angles for extra support.
How far should the stove be from the tent walls?
Follow your tent and stove manual’s clearances. The Overland Sauna stove is engineered to radiate clean, contained heat—but always allow airflow and clearance.
Can I leave my sauna tent up for weeks at a time?
Yes! Overland Sauna tents are made for both quick setup and long-term use. Just monitor for weather damage and secure it well.
Do I need to dig or level the ground first?
Usually not, but removing major bumps and creating a level base helps with stability. No excavation necessary unless the slope is dramatic.